|
More commonly known as the
wastegate and flapper mod this
modification is a MUST when boosting an XR6 Turbo or an F6
FPV. When turbocharger boost is raised above a certain
point, the standard factory swing valve and actuator are
unable vent gasses efficiently to control boost pressure.
After countless hours of research and development XR6 Turbo
Developments has a factory turbo upgrade that allows precise
wastegate system operation in higher boosted XR6 Turbos and
FPV F6s.
Unleash the true potential in you XR6 turbo with
one of our professionally modifies precision housings.
end us your factory turbo and we will:
-
Disassemble and Inspect the turbo
- Remove rear housing
- Port the wastegate
- Fit 38mm flapper valve
- Fit
and adjust new 12psi actuator
- Re assemble the turbo
BONUS!
FREE G-Lock-10
locking washers with every Turbo Upgrade!
Our Price:
$600 plus postage
Email: info@xr6turbodevelopments.com.au
_________________________________________________
When turbocharger boost is raised above a certain point, the
standard factory actuator is unable precisely control the
wastegate swing valve in order to control boost pressure.
XR6 Turbo Developments has a direct replacement actuator kit
that allows precise wastegate system operation in higher
boosted XR6 Turbos and FPV F6s.
These units are available as a kit with an adjustable rod.
Our Price:
$160 plus postage
Email:info@xr6turbodevelopments.com.au
_________________________________________________
We now also offer polished compressor housings for XR6 Turbos. We
use the standard compressor housing and polish it to a mirror
finish.
Very easy to fit when you're upgrading your exhaust housing or we can fit it to your turbo if you are in
Melbourne free of charge; if the turbo is brought to us.
These units are available on a exchange basis or we do
yours.
Our Price:
$160 change over* plus
postage
*$200 deposit
required until we receive yours.
PLEASE NOTE THERE IS A 14 DAY C/O RETURN POLICY.
IF C/O IS
NOT RECEIVED IN 14 DAYS DEPOSIT IS FORFEITED.
_________________________________________________
New Product!
G-Lock Washes
Due to the hanging mounting style of the GARRET turbo on the
Ford BA-BF-FG XR6 Turbo and FPV F6, many owners complain
regarding the nuts that hold the turbo on vibrate loose over
time resulting in a loss of performance and costly repair
bills.
The G-Lock-10 locking system will saving you hundreds of
dollars in servicing costs and repair bills, not to mention
the inconvenience of vehicle down time. The G-Lock-10 system
can reduce the ability of Turbo nuts vibrating loose by over
99.98%.
Click here for more information
Our Price:
$30 set of 4
_________________________________________________
Email:info@xr6turbodevelopments.com.au
|
